Can You Use a Drill As a Screwdriver? The Appropriate Guide

Multi-functionality is becoming increasingly common; therefore, it’s critical to understand which tools can do numerous things and have a single purpose. This knowledge is critical in today’s environment. This article is for you if you’ve ever wondered if can you use a drill as a screwdriver.

Most drills contain a drive function, allowing screws to be driven in. You may use them for drilling in brick or concrete because they are made to fit the material you’re working with. However, a screwdriver with no driving function should not be used to drive a screw since it may be dangerous to your health.

Drills are pricey because of the force required to pierce concrete or masonry. This article may interest those seeking an all-in-one tool or those simply curious about what a drill is capable of. To that end, grab your trusty hammer and prepare to hammer away.

What’s the Difference Between a Screwdriver and a Screw Drill?

People no longer use abacuses to count, wash their clothing in local lakes, or go to work by horse and cart. Instead, drills have made screwdrivers a breeze for you, so take advantage of this incredible technology and enjoy the benefits.

Standard screwdrivers can still be used in a few rare situations, such as for high-end cabinet construction, jewelry repair, and the installation of circuit boards.

There are several advantages to utilizing a drill for most of your fasteners:


Is it possible to turn your wrist at a rate of 33 times per second using a conventional screwdriver’s drill chuck? No? No, I didn’t believe that was the case.


Manually screwing into thick hardwoods may be quite difficult. In addition to damaging your hands and arms, you risk severing the screw head. However, drills can produce torque above 300 inch-pounds, making them ideal for pushing into hard-to-reach places.


Torque clutches are common on quality screw-compatible drills, which disengage the driving head when they reach a certain level of resistance. As a result, you won’t have to worry about breaking the target material while screwing in your fixings.


Relax and let the drill do the work. Handheld screwdrivers can cause wrist discomfort, arm weariness, and even blisters on the palms of experienced users. On the other hand, squeezing the trigger of a power tool is as simple as it gets.

Space Saving

A wide variety of hand tools is required if you want to be able to deal with any kind or size screw and head type. However, you only need a drill and a small package of driving bits.


Screwdriver use isn’t a happy or exhilarating experience. It’s great to handle a powerful electric tool in your hands, though.

 What Type of drill bit should I use?

You wouldn’t use a paint sprayer to remove the wallpaper or a chainsaw to jump-start a car – the proper instrument is required for each task.

Drive screws into wood using a cordless drill instead of an impact driver. As their name implies, these adaptable robots can simultaneously do drilling and driving tasks. Additionally, they’re cordless, so you didn’t have to think about losing power while using them…

Regarding screwdrivers, nothing beats these incredible devices because of their characteristics.

This allows for fast and easy screw bit changes.

Variable torque enables you to customize the amount of muscle to match the strength of the material you’re trying to work with.

Depending on the type of material, the machine may run at different speeds.

Lightweight — allowing for extended use without fatigue.

The lack of a power cable is a welcome relief.

Hands-free operation

Remove screws by reversing the function.

What Type of Screw Bit Do I Need to Get Started?

The form of the screw’s head determines the sort of bit you’ll require. The Phillips head, shaped like a star, is the most common. Using a No. 2 Phillips driver bit, several of these screws may be removed.Driver bits for bugle head batten screws, deck screws, and nut setter hex nuts are some of the most frequent ones you’ll also come across.

What is the Ideal Speed for Driving Screws?

Reduced speed is excellent for beginners and driving screws with Phillips head bits, which do not lock into the screw head like more traditional bits. Increasing the speed of your drill as a screwdriver can help you complete the task more quickly.

Consider Your Goals before deciding on an action plan..

There is a switch marked “action” on the drill with images of several tools. This implies the drill is ready to start driving screws. Other options include basic drilling and drilling into bricks or drilling into concrete with the drill in hammer mode, as well as a few more.

What’s the Torque Setup?

Drills come with a torque-setting adjustment collar with many numbers on it. When using a drill, adjusting the torque is a simple yet useful feature.. You won’t overload the screw if you use the right torque setting on the drill. Take a moment at the beginning of your workday to adjust the settings to suit the task at hand. For example, a lower torque level is often required for soft materials, whereas a greater torque value is required for tougher materials.

Can You Use a Drill As a Screwdriver

Pick a Drill Bit with a Screwdriver Bit on it.

One of the heads might be a Flat blade (Phillips), Flat blade (Phillips), or even Nut driver. This necessitates that you use the correct bit for the screw you’re functioning on.

Screwdriver bits with tips the same size as the screw heads you’re dealing with are also important.

A lesser number means less power. When the drill bit is twisted, it may come loose from the screw head. Softwoods, such as pine, can lead to the wood being eaten apart. Furthermore, you run the risk of damaging the bit or screw head.

If the bit is excessively large, the screw head will emerge from the bit’s edges. As a result, the spinning protrusion might also have the same issues.

 Insert the Screwdriver Bit into the Chuck.

insert the Screwdriver Bit into the Chuck.
insert the Screwdriver Bit into the Chuck.

Bits are held in the chuck, located at the front of the drill. To ensure the drill is holding the bit:

  1. Use the chuck key to tighten it.
  2. Avoid over tightening the drill.
  3. Check to see that it will not come undone while you work on the screw.

The Drill Should Be Held firmly.

Make sure you have a solid grasp of the object you’re holding. There will be a lot of resistance when you try to spin the screw, and you don’t want to lose the tool. In addition, you must always have full command of whatever power equipment you use. This is a crucial aspect of safety that should never be overlooked.

Place the Screwdriver Bit in the Appropriate Location

Look at your screwdriver and ensure the bit is firmly in place. To keep the bit in place, apply pressure with your thumb and forefinger. To avoid damaging the wood or ruining the screw head, you must always keep the bit in place. You may destroy the whole thing if this happens.

Turn the Screw

The drill may be started at a very slow speed if you have to. The instrument must be under your total control at all times. For example, don’t go over a speed that might cause harm to the drill bit if it falls out of place.

Think about Wood Hardness

In the case of Pine, you may be able to tighten the screw such that its top head is flush with its surface. To put it another way, as you tighten down on the wood screw, its cone-shaped head might push the wood away. This isn’t always possible, of course. Also, you don’t want to put too much strain on the wood. There’s a risk of it breaking!

A wood plug concealing a screw tightened below the wood’s surface may be seen in the lower left corner. Again, a countersinking pilot hole bit was employed.

Screw into wood

The problem is exacerbated in woods such as Oak, which is notoriously hard. Both hard and softwoods should be pre-drilled for the screw with a pilot hole beforehand.. Turning and tightening the screw are made simpler with the pilot hole. As an additional benefit, a countersinking pilot hole bit may be used to cut away cone-shaped parts for the threaded hole, permitting you to tighten the screw below the wood’s base. A wooden stopper or a dowel can then be used to close up the gap.

Removing A Screw

Remove the screw in the same manner. Make sure the screwdriver bit is inserted properly by applying pressure. Take care not to let the drill fall out of your hand and secure it.

Remember to spin the screw in the correct direction before continuing. Screws with a standard thread will constitute the majority of your tools. When tightening a screw, the drill should be turned counterclockwise.

However, there are screws that have a reverse thread (sometimes referred to as left-handed threads) as an option.). As a result, rather than turning counterclockwise to tighten, they turn clockwise.

Drills that may be used in forward and reverse directions are controlled by their direction switches. Perhaps a lever near the hand trigger will do. In order to alter the direction of rotation, simply turn the lever to your desired direction. Before changing direction, you should wait for the drill to cease revolving. Prevent drill damage by following these instructions.To learn more, you should consult the drill’s user manual.

Advantages Of Using a Drill as a Screwdriver 

An on-the-go answer

Because they may be used for various tasks, cordless drills are convenient to have on hand. As a result, you won’t have to carry about several tools, especially screwdriver sets, whenever you need to perform various functions.

Powerful Rotors

Using a drill rather than a screwdriver for operations requiring more strength is preferable.


A primary benefit is that only one tool is needed for various tasks. For example, a cordless drill may be used for various tasks, but a screwdriver can only be used for one.

YouTube video


Can you use a drill to screw in screws?

The term “drill driver” refers to cordless drills that may also be used to drive screws. For those who have never used your drill as a screwdriver or tried but failed, here is the detailed instruction for utilizing your drill to drive screws.

Is a drill the same as a screwdriver?

Although each gadget serves a distinct purpose, they are frequently used interchangeably. For example, a screwdriver and a drill are used to fasten or install screws into a surface. There is, however, a notable variation in speed: Using a screwdriver necessitates a slower rate of rotation, which allows for more accuracy.


The electric drills demonstrated in this article may be used to drive screws, as demonstrated in this post. They may both tighten and loosen them at the same time. Step-by-step instructions on how to do this were provided, and a reminder to use a bit that is a proper match for the screw head’s diameter.

Leave a Reply

Your email address will not be published. Required fields are marked *