How to Drill into Metal Studs- The Authentic and Ultimate Method

Metal studs are becoming increasingly popular for commercial and residential building projects because of their high resistance, durability, and cost-effectiveness. When we find metal studs to hang things from or install a TV on, we often find that drilling is the only option. How to drill into metal studs?

Finding the stud in the wall is the first step. Next, you may designate where to drill by locating the edges. A drill with a medium amount of torque with sharp titanium, cobalt, or carbide-tipped twist drill bit will produce the cleanest hole in the metal stud possible. You can only use toggle bolts or drywall screws in these holes.

Wooden studs are more aesthetically pleasing than metal ones, but a good paint job may make them nearly impossible to tell between. Therefore, weighing the benefits and drawbacks of metal studs before diving into how to drill into them is essential.

What are Metal Studs 

Equipment and methods for installing steel studs in the basement and interior walls. You will enjoy a steel framework. The steel studs are precisely straight and won’t shrink or crack. They are lightweight, straightforward to store, and impervious to flame, insects, and decay.

 Metal StudsĀ 
Metal Studs 

The dimensions of metal studs can range in width, depth, and thickness. Frame thickness, webbing width, and flange width are all crucial factors to consider. Metal studs include a ” webbing feature,” where you’ll run your pipes and cables.

Metal studs contain additional dimensions, like flange and lip size, which must be considered. The stud’s flange is where the finishing touches, such as drywall or paneling, will be attached. Where a screw is placed to secure the stud is known as the lip.

Why We Use Metal Studs

Compared to their wooden counterparts, metal studs have several benefits. They are less heavy, more affordable, and perfectly straight. In addition, they won’t warp or shrink when exposed to the elements as wood would. 

Insects, flames, or rot can’t destroy them. However, once embedded in the drywall, you cannot tell them apart unless you hammer on them. Framing screws designed for metal studs are essential in that situation.

 Why You Need to Drill in Metal 

For many reasons, you may need to install drywall inserts, such as when hanging a flat-screen TV, photos, or mirrors. Attaching objects to drywall over metal studs is no problem at all with the help of self-tapping drywall connectors or anchors. However, even though they work great in penetrating drywall, you’ll need to drill a hole to tap into metal studs.

How to Drill into Metal Studs

Metal studs are similar to regular metal in that they may be drilled into. The primary distinction is that studs are hollow, whereas solid metal is not. I outline a strategy for drilling into metal studs in the following sections.

Find the wall’s metal stud and screw it in.

Metal studs must be located before any drilling can begin. Where can I find a metal stud, then? You may either use a magnetic stud detector like a Stud Mark or just hit your middle finger on the wall and listen for just a dull solid sound if the stud is made of metal.. In contrast to their manual counterparts, electronic stud finders are extremely precise. A metal stud may be located with the help of your smartphone’s magnetometer.

This article will briefly go through my two favorite stud finders.

With its low cost and user-friendly design, the 7310 Stud Mark Magnetic Stud Finder is a great option. Two magnetic studs are included, and they may be attached to either side with little trouble. In other words, you may start using it right away without waiting for it to charge..

The Tavool Electronic stud detector 5 in 1 is a superior, high-quality tool.. In addition to locating metal studs, it can detect electrical conduit and wiring. The ability to find the device’s center is its primary advantage.

The Z-pattern motion is the most effective when using a stud finder. Electronic stud finders emit a beep upon contact with metal, whereas traditional ones produce a magnetic pull. Get out your pencil and carefully mark the spot.

The knocking technique calls for a high level of expertise and acute hearing. Try tapping the wall with the knuckle of your middle finger and listening for resonance; if you hear a dull sound, you’re probably right next to a stud.

Find the exact middle of the metal stud so you may drill a hole.

The stud’s strength is compromised if the hole is not drilled in the center. Electronic stud finders include an inbuilt feature that locates the exact center of the stud. Using the finder, you can see exactly where the center of each stud is located, but only if you move it about.

A basic stud finder may be used to locate the rough perimeters on both sides; once found, a pencil mark is made before a pilot hole is drilled. Resistance will act as a guidepost when you go close to the edge. After that, locate the midpoint using a measuring device.

You need to use the correct drill bit to drill a stud on a metal surface.

Traditional twist bits can accomplish the job, but they risk breaking the drill bit or producing a hole with sharp edges. Titanium, cobalt, or carbide-tipped drill bits are what I would like to use myself. For this project, I have created a list of the best available online instruments and materials..

The DEWALT Titanium Drill Bit Set DW1361 includes a variety of drill bits in a variety of sizes, as well as a plastic casing. And the cost is extremely reasonable. The pilot point on the bit is their most vital feature. This aids in the smooth penetrating of the metal.

The Bosch 7-Piece Carbide-Tipped HCK001 Drill Bit Set is an excellent choice for the serious do-it-yourselfer. Unfortunately, this set’s incredible quality and lengthy lifespan come at a considerable price. In addition, the metal studs in the walls will not match these drills.

The DEWALT Cobalt Drill Bit Set DWA1240 is an excellent choice for your needs. If you’re not a fan of drilling, this is the solution for you.. With 14 pieces in various sizes, this set is sure to be useful.

Slow down while drilling into metal studs, and don’t pound.

Low speeds are preferable for drilling into metal studs. The bit will be damaged if the rpm is too high since this will cause it to overheat. RPMs between 700 and 1000 are recommended. Additionally, while drilling into metal studs, you should avoid using the hammering function (this creates unnecessary dents).

Metal studs require special screws.

However, not every screw can be used in a metal stud. Drywall shouldn’t be hung from metal studs, so please stop. After the drywall has been cut to size, pilot holes are not required for installation.. Fine, self-drilling drywall screws are ideal for this application.

Toggle bolts should be used if metal studs need to be drilled to hang a heavy item like a television. They may lock themselves into place and support the weight.

The Advantage of Drill a Metal Studs

Metal studs may be purchased at a fraction of the price of wooden ones, and they are both lighter and straighter. They can be assembled quickly and easily, saving you time and money, and they are resistant to fire, insects, and rot.

  • Due to their low mass and hollow interior, they may be easily moved between job sites.
  • Since they are resistant to termites, you won’t need to apply pesticides to keep them looking good…
  • They survive a long time and are more resistant to twisting and tension caused by earthquakes and other natural calamities than wood is.
  • They are safe for the planet since they can be recycled and emit no harmful volatile organic compounds.
  • They save money as compared to wooden alternatives.
  • This is because they are hollow and lightweight, making them practical for building sites.
  • They may avoid using pesticides since they are resistant to termites.
  • They are more dependable and anti-corrosive..
  • They are recyclable, and they give out no VOCs.

The Disadvantage of Drill a Metal Studs

  • They are challenging to improve upon. Energy expenditures for sawing, bending, and building are very high.
  • Changing the proportions at the last minute while using metal studs is tricky.
  • It’s pretty challenging to screw or tap.
  • Sound echoes are a severe drawback.
  • Metal studs do not provide adequate thermal insulation.
YouTube video


Can I drill through metal studs?

You certainly can drill into metal studs without damaging them, and in many circumstances drilling into metal studs will be necessary. However, it’s crucial to drill pilot holes initially and carefully secure everything to the center of the stud if you’re using the stud to carry weight.

How do you anchor into metal studs?

Put the toggle bolts into the wall and attach the mounting bracket. Just thread the toggling bolt through the opening and snug it to the metal stud. Adjust the tightness of each bolt until it is just snug against the corresponding bracket.. When you’ve got all the bolts in place, you should ensure that the bracket is level before you tighten them completely.


Drilling into a stud may seem complicated, but it’s relatively simple. We promise that if you follow the four simple steps outlined in our manual, you will no longer be afraid to hang anything on your walls. It’s best to be well-prepared before embarking on a new venture.. After reading this, you should be a little better ready to handle anything that comes your way. Wishing you the best of success and many enjoyable hours of hanging.

Leave a Reply

Your email address will not be published. Required fields are marked *